To display the Restart / Reset window, choose Configure
> Restart / Reset.
The Restart / Reset window provides these options
to either
Restart the Switch:
This option restarts the switch without turning off power. The switch
retains its saved configuration settings during the restart process;
however, the device manager is unavailable during the process. When
the process completes, the switch redisplays the device manager.
Reset the Switch
to Factory Defaults: This option resets the switch to its factory
default settings and then restarts the switch.
Note: Resetting the switch to its factory
defaults deletes all customized switch settings, including the IP address.
You will need to reconfigure the basic switch settings (as described
in the switch getting started guide) and use the new IP address to re-launch
the device manager.
After making your choice, click Submit.
Back to Top
|